Configure the firewall's VPN settings for configuration 1

You can optionally configure the Sites to use NAT to translate the IP addresses of the hosts that make connections through this VPN.

  For more details about the product and how to configure features, click Help or press F1.

Steps

  1. Right-click the Firewall element, then select Edit Single Firewall or Edit Firewall Cluster.
  2. In the navigation pane on the left, browse to VPN > Sites.
  3. Drag and drop the networks for the NAT address space on top of the (top-level) automatic Site element on the right.
    The Sites must include only internal networks. Do not add interfaces with the Any Network element in this type of VPN.
  4. Click Save.