Add NAT definitions for multiple Single Firewalls

On the Define NAT Definitions for the Firewalls page, you can define how the Single Firewalls translate network IP addresses.

NAT rules are automatically generated and organized in the Firewall Policy based on the NAT definitions created in the Firewall properties.

  For more details about the product and how to configure features, click Help or press F1.

Steps

  1. If you do not want to configure NAT definitions, click Nexton the Define NAT Definitions for the Firewalls page of the Create Multiple Single Firewalls wizard. Otherwise, continue to the next step.
  2. (Optional) If no more-specific NAT definitions match the traffic, select Use Default NAT Address for Traffic from Internal Networks. This setting uses the default NAT address as the Public IP Address.
  3. (Optional) Click Show Details to view the Default NAT Address properties.
  4. Add or change the NAT definitions.
  5. Click Next.
    The Select Additional Configuration Options page opens.