Define a contact address for an External VPN Gateway if the IP address for contacting the gateway is different from the IP address of the gateway's interface (for example, because of NAT).
For more details about the product and how to configure features, click Help or press F1.
Steps
-
Select Configuration, then browse to SD-WAN.
-
Browse to Gateways.
-
Right-click an External VPN Gateway element, then select
Properties.
-
In the
External VPN Gateway Properties dialog box, click the
Endpoints tab.
-
Right-click an endpoint and select
Properties.
-
Enter the Default contact address or select
Dynamic if the Default contact address is dynamic.
- The Default contact address is used by default whenever a component that belongs to another Location connects to this endpoint.
-
(Optional) If some components cannot use the Default contact address, click
Exceptions to define contact addresses that the components use to connect to this endpoint.
-
Click
Add and select a Location.
A new row is added to the table.
-
Click the
Contact Address column and enter the IP address that components belonging to this Location use when they contact the endpoint, or select
Dynamic.
-
Click
OK to close the
Exceptions dialog box.
-
Click
OK to close the
Endpoint Properties dialog box.