Translate VPN client IP addresses using NAT Pool
The NAT pool defines a range of IP addresses that the firewall can use to translate the source address of connections from VPN clients.
The NAT pool translates the addresses in the same way as NAT rules do. Connections that use the NAT Pool must not match any NAT rules.
Note: Make sure that NAT is enabled for this VPN. The
Apply NAT to traffic that uses this VPN option in the properties of the VPN element must be selected. Otherwise, the NAT pool options have no effect.
For more details about the product and how to configure features, click Help or press F1.
Steps
Engine Editor > VPN > Advanced
Use this branch to change advanced VPN settings.
Option | Definition |
---|---|
Gateway Settings | The Gateway Settings element that defines performance-related VPN options. |
Gateway Profile | The Gateway Profile in use. |
Translate IP Addresses Using NAT Pool | When selected, the specified IP address range and port range are used for translating IP addresses of incoming Forcepoint VPN Client connections to internal networks. Enter the ranges in the IP Address Range and Port Range fields. |