NGFW 6.7 Online Help

Home
NGFW Engine configuration
You can create and modify Firewalls, IPS engines, Layer 2 Firewalls, Master NGFW Engines and Virtual NGFW Engines. You can configure the NGFW Engine properties, activate optional features, and configure advanced NGFW Engine settings.
Configuring the NGFW Engine tester
The tester runs various checks on the engines and initiates responses based on the success or failure of these tests.
Configuring additional test-specific settings for NGFW Engine tests
The settings available to you vary according to the test you select. Some of the tests have additional, test-specific settings.
Configure settings for the Policy test
The Policy test is no longer supported in NGFW version 6.1.0 and later.

About this Help
This online Help was created for Forcepoint Next Generation Firewall (Forcepoint NGFW), version 6.7.0.
Introduction to the Forcepoint Next Generation Firewall solution
Before setting up Forcepoint Next Generation Firewall (Forcepoint NGFW), it is useful to know what the different components do and what engine roles are available.
Deployment
Before you can set up the system and start configuring elements, you must consider how the different SMC components should be positioned and deployed.
Setting up
After deploying the SMC components, you are ready to start using the Management Client and carrying out some of the first configuration tasks.
Monitoring
You can use the SMC to monitor system components and third-party devices. You can also view and filter logs, and create Reports from them.
Controlling NGFW Engines
You can command and set options for engines through the Management Client or on the engine command line. You can also stop traffic manually.
SMC configuration
Security Management Center (SMC) configuration allows you to customize how the SMC components work.
NGFW Engine configuration
You can create and modify Firewalls, IPS engines, Layer 2 Firewalls, Master NGFW Engines and Virtual NGFW Engines. You can configure the NGFW Engine properties, activate optional features, and configure advanced NGFW Engine settings.
- Creating and modifying NGFW Engines
  NGFW Engine elements contain the configuration information that is directly related to the Firewalls, IPS engines, and Layer 2 Firewalls. The configuration information includes interface definitions, cluster mode selection, tester settings, and other options specific to the NGFW Engine.
- Creating and modifying Master NGFW Engine and Virtual NGFW Engine elements
  Virtual NGFW Engines are logically separate NGFW Enginess that run as virtual instances on a physical NGFW appliance. A Master NGFW Engine is a physical appliance that provides resources for Virtual NGFW Engines.
- Network interface configuration
  The network interface configuration for NGFW Engines is stored on the Management Server in the properties of Single Firewall, Firewall Cluster, Single IPS, IPS Cluster, Single Layer 2 Firewall, Layer 2 Firewall Cluster, Master NGFW Engine, and Virtual NGFW Engine elements.
- Connecting NGFW Engines to the SMC
  To maintain the security of your system, the NGFW Engines establish an authenticated and encrypted connection with Log Servers and Management Servers.
- Element-based network address translation (NAT)
  Element-based NAT allows you to define NAT addresses in the properties of an element. The NAT definitions define how firewalls translate network IP addresses.
- Configuring the NGFW Engine tester
  The tester runs various checks on the engines and initiates responses based on the success or failure of these tests.
  - Getting started with the NGFW Engine tester
    The NGFW Engines can be configured with periodical self-tests to make sure that each Firewall, IPS engine, Layer 2 Firewall, and Master NGFW Engine is functioning correctly.
  - Specify global engine tester settings
    The global settings of the tester have default values that you can override to meet your needs.
  - Add NGFW Engine tests
    As well as test-specific settings, some tests share common settings.
  - Configuring additional test-specific settings for NGFW Engine tests
    The settings available to you vary according to the test you select. Some of the tests have additional, test-specific settings.
    - Configure settings for the External engine test
      For the tester to run External tests, configure the available settings.
    - Configure settings for the File System Space engine test
      For the tester to run File System Space tests, configure the available settings.
    - Configure settings for the Free Swap engine test
      For the tester to run Free Swap tests, configure the available settings.
    - Configure settings for the Inline Pair Link Speed engine test
      For the tester to run Inline Pair Link Speed tests, configure the available settings.
    - Configure settings for the Link Status engine test
      For the tester to run Link Status tests, configure the available settings.
    - Configure settings for the Multiping engine test
      For the tester to run Multiping tests, configure the available settings.
    - Configure settings for the Policy test
      The Policy test is no longer supported in NGFW version 6.1.0 and later.
  - View configured NGFW Engine tests
    The test entries that you have configured are displayed in the Tester pane of the Engine Editor.
  - Remove NGFW Engine tests
    Removing a test permanently removes the test settings from the selected NGFW Engine.
  - Disable or enable NGFW Engine tests
    You can disable or enable any individual test or all tests that are run on a specified node.
- Engine permissions
  You can set permissions to control the administration of the engines.
- DNS Relay
  DNS relay allows the firewall to provide DNS services for clients in internal networks.
- Setting up SNMP for NGFW Engines
  SNMP is a standard protocol that different equipment can use to send network management-related information to each other. You can configure NGFW Engines to send SNMP traps to external equipment.
- Setting up LLDP for NGFW Engines
  Network devices can use the Link Layer Discovery Protocol (LLDP) to advertise their identity, capabilities, and neighbors on a local area network.
- Alias element translations for NGFW Engines
  Alias elements can be used to represent other network elements in configurations. The value an Alias takes in a configuration can be different on each NGFW Engine where the Alias is used.
- Add-on features for NGFW Engines
  There are several add-on features that you can use on Firewalls, IPS engines, Layer 2 Firewalls, Virtual Firewalls, Virtual IPS engines, and Virtual Layer 2 Firewalls.
- Advanced NGFW Engine settings
  Advanced settings cover various system parameters related to different features.
Routing
Use the Management Client to configure static or dynamic routing, and use a Multi-Link configuration to manage and distribute inbound and outbound connections.
Traffic inspection policies
Policies are key elements that contain rules for allowing or blocking network traffic and inspecting the content of traffic.
Users and authentication
User accounts are stored in internal databases or external directory servers. You can use Forcepoint NGFW in the Firewall/VPN role or external authentication servers to authenticate users.
Virtual private networks
Forcepoint NGFW supports both policy-based and route-based VPN (virtual private network) tunnels between VPN gateways. For full remote access, Forcepoint NGFW supports both IPsec and SSL VPN tunnels for VPN clients.
Maintenance and upgrades
Maintenance includes procedures that you do not typically need to do frequently.
Troubleshooting
Troubleshooting helps you resolve common problems in the Forcepoint NGFW and SMC.
Appendices

Configure settings for the Policy test

The Policy test is no longer supported in NGFW version 6.1.0 and later.

© 2021 Forcepoint
Published 4 March 2021