SNMP traps and MIBs

You can use these SNMP traps and MIB objects with NGFW Engines.

Table 1. SNMP traps for NGFW Engines
Trap name Objects included Role Description
fwPolicyInstall fwSecurityPolicy FW, L2FW Policy was installed on the Firewall engine.
ipsPolicyInstall ipsSecurityPolicy IPS Policy was installed on the IPS engine.
nodeBoot - FW, IPS, L2FW Node bootup complete.
nodeHwmon nodeHwmonEvent FW, IPS, L2FW Hardware monitoring system has detected problems.
nodeOffline nodeOperState FW, IPS, L2FW Node changed to offline or standby state.
nodeOnline nodeOperState FW, IPS, L2FW Node changed to online state.
nodeShutdown - FW, IPS, L2FW Node is shutting down.
nodeTestFailure nodeTestIdentity FW, IPS, L2FW Test subsystem reported a test failure on the node.
nodeFailedUserLogin nodeLastLogin FW, L2FW Logon failed on the firewall engine's console or through SSH.
nodeUserLogin nodeLastLogin FW, IPS, L2FW Log on initiated on the engine's console or through SSH.
nodeUserLogout nodeLastLogin FW, L2FW Log off on the firewall engine's console or through SSH.
Table 2. Forcepoint NGFW-specific MIBs
MIB Role Description
STONESOFT-SMI-MIB -

High-level registrations MIB. This MIB defines the top-level enterprise registrations for the Forcepoint NGFW products in the .iso.org.dod.internet.private.enterprises.stonesoft branch (OID .1.3.6.1.4.1.1369).

The other MIB modules depend on STONESOFT-SMI-MIB, so it is necessary to load STONESOFT-SMI-MIB first.

STONESOFT-NETNODE-MIB FW, IPS, L2FW Generic network node MIB.
STONESOFT-FIREWALL-MIB FW, L2FW Firewall application MIB.
STONESOFT-IPS-MIB IPS IPS application MIB.
NGFW Engines in the Firewall/VPN role also support objects in the following standard MIBs:
  • IF-MIB (RFC 2863 and RFC 2233)
  • IP-MIB (RFC 2011)
  • SNMP-USER-BASED-SM-MIB (RFC 3414)
  • SNMPv2 MIB (RFC 3418)