Configure policy settings for the NGFW Engine

Policy settings specify which policies the NGFW Engine uses, as well as settings for element-based NAT, alias translation, and automatic rules.

Steps

Browse to NGFW > Properties > Policies.
Configure the settings, then click Save.
Publish the changes.

Example

Fields marked with an asterisk are mandatory.

Table 1. NGFW Engine Properties - Policies
Option	Definition
Layer3 Policy	The selected Layer 3 Policy for the NGFW Engine. We recommend that you do not change this setting.
Inspection Policy	The selected Inspection Policy for the NGFW Engine.
File Filtering Policy	This option is not yet supported.
NAT Definition	When selected, enables options for element-based NAT.
Alias Resolving	Click > Add to add the first row. Click New > Row Before or New > Row After to add more rows. Alias — The Alias element. Type part of the name of an element or browse through the drop-down list to select an element. Alias Value — The translated value of the Alias element. Type part of the name of an element or browse through the drop-down list to select an element.
Automatic Rules Settings	When selected, enables options for automatic rules.

Table 2. NGFW Engine Properties - Policies - NAT Definition
Option	Definition
NAT Element Array	Click > Add to add definitions for element-based NAT.
NAT Type	Select the translation type. Static — Static network address translation is used. For each original address there is a single, predefined translated address. Dynamic — Dynamic network address translation is used. Dynamic NAT uses ports to track connections using the same IP address.
NAT Address Private	The element that represents the private IP address. Type part of the name of an element or browse through the drop-down list to select an element.
NAT Address Public	Select the source of the public IP address. NAT Default — The default address is used as the public IP Address. IP Address — Enter an IP address. NAT Interface Addr — Click , then select an interface. Element — Type part of the name of an element or browse through the drop-down list to select an element.
NAT Port Filter	To limit NAT only to traffic that goes to selected destination ports, select a Service or Service Group element to act as a port filter. The Service or Service Group element includes the destination port information (a single destination port or a range of ports). Type part of the name of an element or browse through the drop-down list to select an element.
NAT Default Enabled	The NGFW Engine uses the default NAT address as the public IP address if there is not a more specific NAT definition that matches the traffic. When you select this option, a NAT rule is generated at the end of the NAT rules in the policy. If no NAT rule matches the traffic, no NAT is applied unless you enable the Default NAT Address.

Table 3. NGFW Engine Properties - Policies - Automatic Rules Settings
Option	Definition
Logging	When selected, enables the logging options.
Log Level	The log level for traffic that matches automatic rules. None — Does not create any log entry Transient — Creates a log entry that is shown on the Logs tab, but is not stored. Stored — Creates a log entry that is stored on the NGFW Engine. Essential — Creates a log entry that is shown on the Logs tab and saved for further use. Alert — Triggers an alert with the severity that you define. Automatic — This option is not supported in the Access policy.
Severity	When the Log Level is set to Alert, defines the severity of the alert.
Connection Closing	Specifies how log entries are created when connections are closed. None — No log entries are created. Normal — Both connection opening and closing are logged, but no information about the volume of traffic is collected. Accounting — Both connection opening and closing are logged and information about the volume of traffic is collected.
Log Application	Defines whether information about Application detection is included in the log data. Off — Information about Application detection is not included in the log data. Default — Information about Application detection is included in the log data if the information is available without additional inspection. Enforced — Information about Application detection is always included in the log data if the Application can be identified.
Log URL Category	Defines whether information about URL categorization is included in the log data. Off — URL categories are not included in the log data. Default — URL categories are included in the log data for matching traffic when URL Categories are used as matching criteria in the rule. Enforced — URL categories are always included in the log data if the URL category can be identified.