Create Access rules allowing traffic from Management Servers to external hosts

If the external host and Management Server are separated by a Firewall or Layer 2 Firewall, edit the Policy to allow traffic from the Management Server to the host.

  For more details about the product and how to configure features, click Help or press F1.

Steps

  1. Select Configuration.
  2. Browse to Policies
  3. Browse to Firewall Policies or Layer 2 Firewall Policies, depending on the type of policy that you want to edit.
  4. Right-click the Firewall or Layer 2 Firewall policy, then select Edit Firewall Policy or Edit Layer 2 Firewall Policy.
  5. Click the IPv4 Access or IPv6 Access tab, then add an Access rule with the following values:
    • Source: your Management Server
    • Destination: the target Host element
    • Service: Syslog (UDP) or Syslog (TCP), depending on the protocol used. For TLS-protected traffic, select TCP with TLS. The same Service and Port that was selected in the Audit Forwarding rule must be selected here.
    • Action: Allow
  6. If you have finished editing the policy, click Save and Install.