Configure LDAP attribute mapping

On the Attributes tab, you can define how attributes in the Active Directory or LDAP directory are mapped to user properties in the SMC.

You might need to change or fill in these values according to the server’s configuration. Enter the same values for the attributes that are defined in the Active Directory Server's or LDAP Server’s schema file.

For more details about the product and how to configure features, click Help or press F1.

Steps

Select Configuration, then browse to User Authentication.
Right-click Servers and select New > Active Directory Server or New > LDAP Server, or right-click an existing Active Directory Server or LDAP Server element and select Properties.
Click the Attributes tab.
Configure the Attribute settings.

Active Directory Server Properties dialog box

Use this dialog box to define Active Directory Server properties.

Option	Definition
General tab
Name	The name of the element.
IP Address	Specifies the server IP address. Only IPv4 addresses are supported.
Resolve	Automatically resolves the IP address of the server.
Location	A Location is needed if NAT is applied between a Firewall or Management Server and the Active Directory server.
Contact Addresses	Default — Used by default whenever a component that belongs to another Location connects to this server. Exceptions — Opens the Exceptions dialog box.
LDAP Protocol	Specifies the LDAP protocol that is used for the LDAP connection. LDAP — The LDAP is used without encryption. LDAPS — The LDAPS protocol is used for encryption. Start TLS — Start TLS is used for encryption.
LDAP Port (Optional)	Specifies the port number if the server communicates on a port other than the default TCP 389 port. The predefined Firewall Template allows the engines to connect to the default port. If you change to a custom port, you must add an Access rule to allow the traffic.
Timeout	Specifies the time (in seconds) that SMC components wait for the server to reply.
TLS Profile (When the LDAP Protocol is LDAPS or Start TLS)	Specifies the settings for cryptography, trusted certificate authorities, and the TLS version used in TLS-protected traffic. Click Select to select a TLS Profile element.
TLS Server Identity (When the LDAP Protocol is LDAPS or Start TLS)	Determines how the identity of the LDAP server is verified. Edit — Opens the TLS Server Identity dialog box. Remove — Removes the configured TLS Server Identify.
Base DN	Enter the LDAP tree under which the authenticating users accounts are stored. Example: (DNS-based tree) dc=example,dc=com Example: ("O-based" tree used, for example, in Novell eDirectory) ou=astronauts,o=government,st=Florida,c=US
Anonymous (Optional)	When selected, allows NGFW Engines and Management Servers to connect to the LDAP server without a user name and password. When the option is selected, the Bind User ID and Bind Password options are not available.
Bind User ID	Define the Distinguished Name of the User ID that the Firewalls and Management Servers use to connect to the server. This user account must exist in the user database. Make sure the account you use has the permissions to manage other user accounts. Example: (DNS-based tree) uid=ExampleOrganization,ou=Administrators,dc=example,dc=com Example: ("O-based" tree used, for example, in Novell eDirectory) uid=ExampleOrganization,ou=Administrators,ou=astronauts, o=government,st=Florida,c=US
Bind Password	Specifies the password for the user account that the Firewalls and Management Servers use to connect to the server.
Hide	Deselect to see the password as you type.
Category (Optional)	Includes the element in predefined categories. Click Select to select a category.
Tools Profile	Adds commands to the element right-click menu.Click Select to select an element.
Comment (Optional)	A comment for your own reference.
Check Connectivity	Tests connectivity to the Active Directory Server.

Option	Definition
Object Classes tab
User ObjectClass	Allows you to add user objectclasses manually. If your Active Directory server has Active Directory server user object classes that are not defined in the SMC by default, you must add those object classes to the Active Directory Server Object classes in the server properties. This way, the existing classes on the LDAP server can also be used for authentication.
Add	Adds the user objectclass name to the list of available classes.
Remove	Removes the user objectclass name from the list of available classes.
Group ObjectClass	Allows you to add group objectclasses manually. If your Active Directory server has Active Directory group object classes that are not defined in the SMC by default, you must add those object classes to the Active Directory Object classes in the server properties. This way, the existing classes on the Active Directory server can also be used for authentication.
Add	Adds the group objectclass name to the list of available classes.
Remove	Removes the group objectclass name to the list of available classes.

Option	Definition
Attributes tab
Schema	Standard — Select if you are using the external LDAP directory server’s standard schema files. Updated — Select if you have extended the schema file to include SMC-specific attributes.
UserId	Specifies the name of the attribute that is used as the UserID. This attribute can be used to identify users by their UserID in certificate authentication.
Group Member	Specifies the name that the server uses for the Group Member Attribute. The default value is member for standard schema, and sgMember for updated schema.
Authentication (Updated Schema only)	Specifies the Authentication Attribute for storing the authentication method information. The default value is sgauth.
Display Name (Updated Schema only)	Specifies the name that the server uses for the Display Name attribute.
E-mail (Updated Schema only)	Specifies the name of the attribute that is used for storing user email addresses. This attribute can be used to identify users by their email address in certificate authentication.
User Principal Name (UPN)	Specifies the name of the attribute for storing the user principal name. This attribute can be used to identify users by their user principal name in certificate authentication.
Mobile (Updated Schema only)	Specifies the name of the attribute for storing user mobile phone numbers.
Framed IP	This option is included for backward compatibility with legacy SMC software versions. Selecting this option has no effect on SMC version 5.9.0 or later.
Password Method Password	Specifies the name of the password attribute for the Password Authentication Method.
Mobile Text Method Password	Specifies the name of the password attribute for the Mobile Text Authentication Method.
Mobile ID Challenge Method PIN	Specifies the name of the PIN attribute for the Mobile ID Challenge Authentication Method.
Mobile ID Synchronized Method PIN	Specifies the name of the PIN attribute for the Mobile ID Synchronized Authentication Method.

Option	Definition
Client Certificate tab
User Search for Client Certificate Authentication	Specifies the name of the value in the distinguished name that is checked to verify the client identity. The following values are supported: CN — The client identity is checked against the UserId attribute specified for the server. The value of the UserId field on the Attributes tab must match the attribute that contains the user's common name. email — The client identity is checked against the E-mail attribute specified for the server. The value of the E-mail field on the Attributes tab must match the attribute that contains the user's email address. UID — The client identity is checked against the UserId attribute specified for the server. The value of the UserId field on the Attributes tab match the attribute that contains the user's UID.

Option

Definition

Client Certificate tab

User Search for Client Certificate Authentication

Specifies the name of the value in the distinguished name that is checked to verify the client identity.

The following values are supported:

CN — The client identity is checked against the UserId attribute specified for the server. The value of the UserId field on the Attributes tab must match the attribute that contains the user's common name.
email — The client identity is checked against the E-mail attribute specified for the server. The value of the E-mail field on the Attributes tab must match the attribute that contains the user's email address.
UID — The client identity is checked against the UserId attribute specified for the server. The value of the UserId field on the Attributes tab match the attribute that contains the user's UID.

Option	Definition
Authentication tab
User Network Policy Server Method (NPS)	When selected, uses the Windows server IAS/NPS.
Port Number	Specifies the port for your Windows server IAS/NPS.
Shared Secret	Specifies the shared secret defined for RADIUS clients on the Active Directory server.
Hide	Deselect to see the text as you type.
Number of Retries	If an SMC component's attempts to connect to the Active Directory server fails, specifies the number of times it tries to connect again before giving up on the authentication.
IP Address (Optional)	Specifies the IP address for authentication when the authentication service on the Active Directory server uses a different IP address than the server itself.
Authentication Methods	Specifies the supported authentication methods for the Active Directory Server. Click Add to select authentication methods. Note: The User password authentication method requires you to update the schema with SMC-specific attributes. Alternatively, you can use the LDAP Authentication authentication method to authenticate users using user names and passwords stored in the external LDAP database without updating the schema. Note: If you use the Active Directory Server with the Integrated User ID Service for user identification, the supported authentication methods are User Password and LDAP Authentication.
Remove	Removes the selected elements from the External Authentication Methods list.

Option	Definition
Advanced tab
Secondary IP Addresses	Allows you to specify any additional device IP addresses. You can enter the additional IP addresses here instead of creating additional elements for the other IP addresses. The secondary IP addresses are valid in policies and in routing and antispoofing. You can add several IPv4 and IPv6addresses (one at a time). Add — Adds a row to the table. Remove — Removes the selected IP address from the list.
Timeout	The time (in seconds) that SMC Components wait for the server to reply.
Max Entries	The maximum number of LDAP entries that are returned in an LDAP response.
No Limit	Deselect to specify the maximum number of LDAP entries returned.
Page Size (Optional)	The maximum number of LDAP entries that are returned on each page of the LDAP response.
No Pages	Deselect to specify the maximum number of LDAP entries returned on each page.

Option	Definition
Monitored Servers tab
Server Type	The type of server from which the Integrated User ID Service receives information about users' IP addresses. The Active Directory server can receive information from Domain Controller servers and Exchange Servers.
IP Address	The IP address of the Domain Controller server or Exchange Server. Both IPv4 and IPv6 addresses are supported.
User	The user name of a user in the domain that has permission to execute WMI queries from a remote computer. Note: Enter only the user name without any domain information. The domain information is automatically added to the user name.
Password	The password for the user account with Domain Admin credentials.
Add	Adds a row to the table. Allows you to define a Domain Controller server or an Exchange Server.
Edit	Allows you to edit the settings of the selected server.
Remove	Removes the selected row from the table.

Option	Definition
Monitoring tab
Log Server	The Log Server that monitors the status of the element.
Status Monitoring	When selected, activates status monitoring for the device. You must also select the Probing Profile that contains the definitions for the monitoring. When you select Status Monitoring, the element is added to the tree in the Home view.
Probing Profile	Shows the name of the selected Probing Profile. Click Select to select a Probing Profile element.
Log Reception	Activates syslog reception from this device. You must select the Logging Profile that contains the definitions for converting the syslog entries to SMC log entries. You must also select the Time Zone in which the device is located. By default, the local time zone of the computer you are using is selected.
Logging Profile	Shows the name of the selected Logging Profile. Click Select to select a Logging Profile element.
Time Zone	Selects the time zone for the logs.
Encoding	Selects the character set for log files.
SNMP Trap Reception	Enables the reception of SNMP traps from the third-party device.
NetFlow Reception	Enables the reception of NetFlow data from the third-party device. The supported versions are NetFlow v5, NetFlow v9, and IPFIX (NetFlow v10).

Option	Definition
NAT tab
Firewall	Shows the selected firewall.
NAT Type	Shows the NAT translation type: Static or Dynamic.
Private IP Address	Shows the Private IP Address.
Public IP Address	Shows the defined Public IP Address.
Port Filter	Shows the selected Port Filters.
Comment	An optional comment for your own reference.
Add NAT Definition	Opens the NAT Definition Properties dialog box.
Edit NAT Definition	Opens the NAT Definition Properties dialog box for the selected definition.
Remove NAT Definition	Removes the selected NAT definition from the list.

LDAP Server Properties dialog box

Use this dialog box to define Lightweight Directory Access Protocol (LDAP) Server properties.

Option	Definition
General tab
Name	The name of the element.
IP Address	Enter the IP address of the server.
Resolve	Automatically resolves the IP address of the server.
Location	Specifies the location for the server if there is a NAT device between the server and other SMC components.
Contact Addresses	Default — Used by default whenever a component that belongs to another Location connects to this server. Exceptions — Opens the Exceptions dialog box.
LDAP Protocol	Specifies the LDAP protocol that is used for the LDAP connection. LDAP — The LDAP is used without encryption. LDAPS — The LDAPS protocol is used for encryption. Start TLS — Start TLS is used for encryption.
LDAP Port (Optional)	The port number if the server communicates on a port other than the default port (TCP port 389). The predefined Firewall Template allows the engines to connect to the default port. If you change to a custom port, you must add a Access rule to allow the traffic.
TLS Profile (When the LDAP Protocol is LDAPS or Start TLS)	Specifies the settings for cryptography, trusted certificate authorities, and the TLS version used in TLS-protected traffic. Click Select to select a TLS Profile element.
TLS Server Identity (When the LDAP Protocol is LDAPS or Start TLS)	Determines how the identity of the LDAP server is verified. Edit — Opens the TLS Server Identity dialog box. Remove — Removes the configured TLS Server Identify.
Base DN	The LDAP tree under which the authenticating users’ accounts are stored. Example (DNS-based tree): dc=example,dc=com Example (“O-based” tree used, for example, in Novell eDirectory): ou=astronauts,o=government,st=Florida,c=US
Anonymous (Optional)	When selected, allows NGFW Engines and Management Servers to connect to the LDAP server without a user name and password. When the option is selected, the Bind User ID and Bind Password options are not available.
Bind User ID	The Distinguished Name of the User ID that the NGFW Engines and Management Servers use to connect to the server. This user account must exist in the user database. Make sure the account you use has the privileges to manage other user accounts. Example (DNS-based tree): uid=ExampleOrganization,ou=Administrators,dc=example,dc=com Example (“O-based” tree used, for example, in Novell eDirectory): uid=ExampleOrganization,ou=Administrators,ou=astronauts, o=government,st=Florida,c=US
Bind Password	The password for the user account that the Firewalls and Management Servers use to connect to the server.
Hide	Deselect to see the password as you type.
Category (Optional)	Includes the element in predefined categories. Click Select to select a category.
Tools Profile	Adds commands to the element right-click menu.Click Select to select an element.
Comment (Optional)	A comment for your own reference.
Check Connectivity	Tests connectivity to the LDAP Server.

Option	Definition
Object Classes tab
User ObjectClass	Allows you to add user objectclasses manually. If your LDAP server has LDAP user object classes that are not defined in the SMC by default, you must add those object classes to the LDAP Object classes in the server properties. This way, the existing classes on the LDAP server can also be used for authentication.
Add	Adds the user objectclass name to the list of available classes.
Remove	Removes the user objectclass name to the list of available classes.
Group ObjectClass	Allows you to add group objectclasses manually. If your LDAP server has LDAP group object classes that are not defined in the SMC by default, you must add those object classes to the LDAP Object classes in the server properties. This way, the existing classes on the LDAP server can also be used for authentication.
Add	Adds the group objectclass name to the list of available classes.
Remove	Removes the group objectclass name to the list of available classes.

Option	Definition
Attributes tab
Schema	Standard — Select if you are using the external LDAP directory server’s standard schema files. Updated — Select if you have extended the schema file to include SMC-specific attributes.
UserId	Specifies the name of the attribute that is used as the UserID. This attribute can be used to identify users by their UserID in certificate authentication.
Group Member	The name that the server uses for the Group Member Attribute. By default, the attribute is set to member for standard schema, and sgMember for updated schema.
Authentication (Updated Schema only)	The Authentication Attribute for storing the authentication method information. By default, the attribute is set to sgauth.
Display Name	Specifies the name that the server uses for the Display Name attribute.
E-mail	Specifies the name of the attribute that is used for storing user email addresses. This attribute can be used to identify users by their email address in certificate authentication.
User Principal Name (UPN)	Specifies the name of the attribute for storing the user principal name. This attribute can be used to identify users by their user principal name in certificate authentication.
Mobile	Specifies the name of the attribute for storing user mobile phone numbers.
Framed IP	This option is included for backward compatibility with legacy SMC software versions. Selecting this option has no effect on SMC version 5.9.0 or later.
Password Method Password	The name of the password attribute for the Password Authentication Method.
Mobile Text Method Password	The name of the password attribute for the Mobile Text Authentication Method.
Mobile ID Challenge Method PIN	The name of the PIN attribute for the Mobile ID Challenge Authentication Method.
Mobile ID Synchronized Method PIN	The name of the PIN attribute for the Mobile ID Synchronized Authentication Method.

Option	Definition
Client Certificate tab
User Search for Client Certificate Authentication	Specifies the name of the value in the distinguished name that is checked to verify the client identity. The following values are supported: CN — The client identity is checked against the UserId attribute specified for the server. The value of the UserId field on the Attributes tab must match the attribute that contains the user's common name. email — The client identity is checked against the E-mail attribute specified for the server. The value of the E-mail field on the Attributes tab must match the attribute that contains the user's email address. UID — The client identity is checked against the UserId attribute specified for the server. The value of the UserId field on the Attributes tab match the attribute that contains the user's UID.