Add Port Group Interfaces for Single Firewalls

You can define one or more port group interfaces for an integrated switch. Port groups simplify port and network segment configuration.

Before you begin

You must add the integrated switch before you can add port group interfaces.

Traffic inside a port group is not inspected. The traffic between port groups is inspected by the firewall in the same way as other traffic.

For more details about the product and how to configure features, click Help or press F1.

Steps

Right-click a Single Firewall, then select Edit Single Firewall.
In the navigation pane on the left, select Interfaces.
In the right pane, right-click the switch and select New Port Group Interface.
In the Port Group Interface Properties dialog box, define the port group interface properties.
Click OK.
The port group interface is added to the interface list. The defined switches and port group interfaces are displayed, for example, as 0.1 for switch ID 0 with port group 1.

Next steps

Add IP addresses to the port group interface.

Port Group Interface Properties dialog box

Use this dialog box to configure the properties of port group interfaces.

Option	Definition
General tab
Port Group ID	The ID of the port group.
Port	Specifies the ports that belong to the selected port group. To add a port, click Add, or to remove a selected port, click Remove.
Comment (Optional)	A comment for your own reference.
Zone (Optional)	Select the network zone to which the interface belongs. Click Select to select an element, or click New to create an element.
MTU (Optional, not supported on Virtual NGFW Engines)	The maximum transmission unit (MTU) size on the connected link. Either enter a value between 400–65535 or select a common MTU value from the list. If the interface is a Physical Interface, the same MTU is automatically applied to any VLANs created under it. The default value (also the maximum standard MTU in Ethernet) is 1500. Do not set a value larger than the standard MTU, unless you know that all devices along the communication path support it. Note: To set the MTU for a Virtual NGFW Engine, you must configure the MTU for the interface on the Master NGFW Engine that hosts the Virtual NGFW Engine, then refresh the policy on the Master NGFW Engine and the Virtual NGFW Engine.
Comment (Optional)	A comment for your own reference.

Option	Definition
General tab, Quality of Service and Bandwidth Management section
QoS Mode (Optional)	Defines how QoS is applied to the link on this interface. If Full QoS or DSCP Handling and Throttling is selected, a QoS policy must also be selected. If Full QoS is selected, the throughput must also be defined. If the interface is a Physical Interface, the same QoS mode is automatically applied to any VLANs created under it.
QoS Policy (DSCP Handling and Throttling and Full QoS modes only)	The QoS policy for the link on this interface. If the interface is a Physical Interface, the same QoS policy is automatically selected for any VLANs created under it. Note: If a Virtual Resource has a throughput limit defined, the interfaces on the Virtual NGFW Engine that use a QoS policy all use the same policy. The policy used in the first interface is used for all the interfaces.
Interface Throughput Limit (Full QoS mode only)	Enter the throughput for the link on this interface as megabits per second. If the interface is a Physical Interface, the same throughput is automatically applied to any VLANs created under it. The throughput is for uplink speed (outgoing traffic) and typically must correspond to the speed of an Internet link (such as an ADSL line), or the combined speeds of several such links when connected to a single interface. CAUTION: Make sure that you set the interface speed correctly. When the bandwidth is set, the NGFW Engine always scales the total amount of traffic on this interface to the bandwidth you defined. This scaling happens even if there are no bandwidth limits or guarantees defined for any traffic. CAUTION: The throughput for a Physical Interface for a Virtual NGFW Engine must not be higher than the throughput for the Master NGFW Engine interface that hosts the Virtual NGFW Engine. Contact the administrator of the Master NGFW Engine before changing this setting.

Option	Definition
DHCP tab
DHCP Mode	Select the DHCP mode: Disabled — DHCP relay is disabled. DHCP Relay — Enables DHCP relay on the interface. DHCP Server — Activates the integrated DHCP server on the interface.

Option	Definition
DHCP tab, DHCP Relay settings (If DHCP Mode is DHCP Relay)
Resources	Select from the available DHCP servers.
Search	Opens a search field for the selected element list.
Up	Navigates up one level in the navigation hierarchy. Not available at the top level of the navigation hierarchy.
Tools	New — Creates an element of the specified type. Show Deleted Elements — Shows elements that have been moved to the Trash.
Add	Adds the DHCP server to the interface.
Remove	Removes the DHCP server from the interface.
Max Packet Size	Adjusts the maximum allowed packet size.
DHCP Relay	Select the CVI or IP address you want to use for DHCP relay.

Option	Definition
DHCP tab, DHCP Server settings (If DHCP Mode is DHCP Server)
DHCP Address range	Defines the DHCP address range that the Firewall assigns to clients in one of the following ways: Select — Allows you to select an address range element. Address — Allows you to enter a single IP address or an IP address range. Note: The DHCP address range must be in the same network space defined for the Physical Interface. The DHCP address range must not contain the Firewall's IP addresses or broadcast IP addresses of networks behind the Firewall.
Primary DNS Server	Enter the primary DNS server IP address that clients use to resolve domain names. If there is a listening IP address for DNS Relay on the same interface, clients use the DNS services provided by the firewall by default. If you want clients to use a different external DNS server, enter the IP address of the external DNS server.
Secondary DNS Server	Enter the secondary DNS server IP address that clients use to resolve domain names.
Primary WINS Server	Enter the primary WINS server IP address that clients use to resolve NetBIOS computer names.
Secondary WINS Server	Enter the secondary WINS server IP address that clients use to resolve NetBIOS computer names.
Default Gateway	Enter the IP address through which traffic from clients is routed.
Default Lease Time	Enter the time after which IP addresses assigned to clients must be renewed.
Domain Name Search List (Optional)	Enter a comma-separated Domain Name Search List to configure DNS search suffixes.

Option	Definition
Advanced tab (All optional settings)
Override Engine's Default Settings	When selected, the default settings of the engine are overridden.
SYN Rate Limits	Default — The interface uses the SYN rate limits defined for the engine on the Advanced Settings branch of the Engine Editor. None — Disables SYN rate limits on the interface. Automatic — This is the recommended mode if you want to override the general SYN rate limits defined for the engine on the Advanced Settings branch of the Engine Editor. The engine calculates the number of allowed SYN packets per second and the burst size (the number of allowed SYNs before the engine starts limiting the SYN rate) based on the engine’s capacity and memory size. Custom — Enter the values for Allowed SYNs per Second and Burst Size.
Allowed SYNs per Second	Defines the number of allowed SYN packets per second.
Burst Size	The number of allowed SYNs before the engine starts limiting the SYN rate. Tip: We recommend that you set the burst size to be at least one tenth of the Allowed SYNs per Second value. If the burst size is too small, SYN rate limits do not work. For example, if the value for Allowed SYNs per Second is 10000, set the value for Burst Size to at least 1000.
Enable Log Compression	Allows you to define the maximum number of separately logged entries. For each event type, Antispoofing or Discard, you can define: Log Rate (Entries/s) — The maximum number of entries per second. The default value for antispoofing entries is 100 entries/s. By default, Discard log entries are not compressed. Burst Size (Entries) — The maximum number of matching entries in a single burst. The default value for antispoofing entries is 1000 entries. By default, Discard log entries are not compressed.
Set to Default	Returns all changes to the log compression settings to the default settings.
Send IPv6 Router Advertisements	Select and specify what configuration information is offered in the Router Advertisement messages to devices that connect to the same network as the firewall. Managed address configuration — When selected, the router advertisement messages that the Firewall sends instruct the hosts to use the DHCPv6 protocol to acquire IP addresses and other configuration information. Other configuration — When selected, the router advertisement messages that the Firewall sends instruct the hosts to acquire the IPv6 prefix and the default route information from the router advertisement messages, and to use the DHCPv6 protocol to acquire other configuration information (such as DNS server addresses).

Select Port dialog box

Use this dialog box to add ports to the current Port Group.

Option	Definition
Port	Specifies one or more ports to be added to the current Port Group.
Comment	An optional comment about the port for your own reference.